57th Aircraft Maintenance Group Archives

The corrosion shop performs approximately 12 to 15 full paint jobs per year With half its two-toned brown paint sanded away and swirls of green underneath the paint, the F-16 Fighting Falcon looks as if it had been submerged under water for 50 years rather than just coming off the flightline at Nellis Air Force Base (AFB). As told by Airman 1st Class Mikaley Kline, 99th Air Base Wing Public Affairs in his article Corrosion shop gives aircraft new ‘shades,’ the F-16, assigned to the 57th Aircraft Maintenance Group (MXG), was brought into the corrosion shop to undergo a full paint job. The aircraft was transforming from a two-tone brown to an arctic paint scheme consisting of black, gray and white. "On a standard F-16 like this, it'll take us about a week to finish repainting it," said Jeff Dezell, 57th MXG corrosion shop lead, in a U.S. Air Force (USAF) news release. "It's kind of cool because on a Monday the worst looking jet in the fleet will come to our shop and on Friday the best looking jet will go out. It's rewarding from that point of view. It's like making them brand new again." Troy Blaschko, 57th Maintenance Group Corrosion shop aircraft painter, demonstrates how to scuff sand an F-16 Fighting Falcon inside a temperature-controlled building on Nellis Air Force Base, Nev.. Blaschko is preparing the aircraft to undergo a full paint job which will transform the Viper from a two-tone brown to an arctic paint scheme consisting of black, gray and white. A day or two before going to the corrosion shop, an aircraft will go to the wash rack to be cleansed. "An aircraft will come in on a Monday morning where it'll be jacked up and the gear will be retracted up into the airplane," said Dezell. "Next thing we'll do is mask off all the areas that don't require paint or can't be painted over. After that we'll start the process of scuff sanding the aircraft which is usually a two to three shift operation." Having a swift and efficient team of aircraft painters in place helps Dezell determine where they'll be in the painting process and on what day of the week they'll do certain tasks on. F-16C Fighting Falcon 57th Wing, 64th Aggressor Squadron, WA/83-159 - Nellis AFB, NV - 2016 – Profile Print by AircraftProfilePrints.com "On Wednesday, we'll apply the primer and top coat to the jet," said Dezell. "Then on Thursday and Friday we'll apply the stencils and local markings such as the 'WA' on the tail or tail numbers. With four people working on each shift the process takes about a week to complete." The patterns used on aggressor aircraft are supposed to mirror one another. "The patterns are laid out in the technical orders, so that what you see on the bottom is mirrored on the top side," said J.J. Ruddell, a 57th MXG corrosion shop aircraft painter. "So if you're looking up through the jet, the patterns should be translucent. You paint from the darkest to the lightest color." J.J. Ruddell, 57th Maintenance Group corrosion shop aircraft painter, sprays primer on an F-16 Fighting Falcon inside a temperature-controlled building on Nellis Air Force Base, Nev.. There are nine different paint schemes, but of those nine, six are used on F-16s. "The owning units decide what color they would like the aircraft to be painted based on their needs as well as how many of that particular paint scheme they might need," said Dezell. "We have the Aggressors stationed here, and other than Eielson AFB, you wouldn't see these paint schemes at any other base. We have a paint schemes that they don't even have up there. We designed the blizzard paint scheme here and it was coordinated into the technical data based on our original drawings and measurements." F-16C Fighting Falcon 57th Wing, 64th Aggressor Squadron, WA/86-0280 - Nellis AFB, NV - 2012 – Profile Print by AircraftProfilePrints.com The corrosion shop performs approximately 12 to 15 full paint jobs per year. "Every aircraft is supposed to be painted on a six-year cycle," said Dezell. "When we're not doing a full paint we're doing major touch-ups to an aircraft. An aircraft might require a new wing or stabilizer or a new piece added to it because the old one was bad. It may not generate the need for the whole aircraft to be repainted, but it may come in for about three days to have that particular component painted. So, there's always an aircraft in here, they're just not always being fully painted." Sean Cornwall, 57th Maintenance Group Corrosion shop aircraft painter, sprays paint onto an F-16 Fighting Falcon inside a temperature-controlled building on Nellis Air Force Base, Nev.. For the aircraft painters in the corrosion shop, all the painting is done freehand with a pattern to help guide them. "It's just the swipe of a gun. That's where the skill comes in because anybody can paint a square box," said Dezell. "In cutting patterns, that's where the true skill of an aircraft painter comes out. The technical data is a shaded drawing of how the final product is supposed to look at the end, plus or minus a foot." A repainted F-16 Fighting Falcon sits inside a temperature-controlled room on Nellis Air Force Base, Nev.. Photo credit: Airman 1st Class Mikaley Kline / U.S. Air Force Artwork courtesy of AircraftProfilePrints.com

What are you waiting for? Set your Throttles to Full AB and join The Aviation Geek Club!

57th Aircraft Maintenance Group

HERE’S HOW NELLIS AFB CORROSION SHOP REPAINTS AGGRESSORS’ F-16 FIGHTING FALCONS